Using skills of turning tool

Turning tool types and uses turning tool is the most widely used single - edged cutting tool. It is also the basis of learning and analyzing all kinds of cutting tools. Turning tool is used in various lathes to process outer circle, inner hole, end face, thread, grooves and so on. According to the structure of turning tool can be divided into integral turning tool, welding turning tool, machine clip turning tool, indexable turning tool and forming turning tool. The application of indexable turning tool is becoming more and more extensive, and the proportion of turning tool is gradually increasing.

1. Carbide welding turning tool

The so-called welding turning tool, is in the carbon steel tool rod according to the requirements of the tool geometric Angle of the cutter slot, welding carbide tool in the slot, and according to the selected geometric parameters after grinding the use of turning tool.

2. Machine clamping tool

Machine clamp turning tool is a turning tool that uses ordinary tool and clamps the tool on the tool bar by means of mechanical clamping. This kind of tool has the following characteristics:

Because the tool durability is improved, the use time is longer, the tool change time is shortened, and the production efficiency is improved.

The end of the pressing plate used to press the tool can act as a chip breaker.

3. Mechanical clamping tool

The tool does not go through high temperature welding, avoiding the hardness of the tool caused by welding, crack and other defects, improve the durability of the tool.

After the tool is reground, the size of the tool will gradually become smaller. In order to restore the working position of the tool, the tool adjustment mechanism is often set on the turning tool structure to increase the number of tool regrinding.

The end of the pressing plate used to press the tool can act as a chip breaker.

4. Indexable turning tool

Indexable turning tool is a machine - clip turning tool using indexable tool. After a blunt cutting edge can be quickly transposed to the adjacent new cutting edge, can continue to work, until all the cutting edges on the tool have been blunt, the tool will be scrapped. After replacing the new tool, the turning tool can continue to work.